Motorcraft Manual Transmission Fluid is a premium, fully synthetic gear oil designed for Ford vehicles, ensuring optimal performance and protection for manual transmissions.
Overview of Motorcraft Manual Transmission Fluid
Motorcraft Manual Transmission Fluid is a premium, fully synthetic SAE 75W-90 gear oil designed for Ford vehicles. It is specifically recommended for IB5 and MTX-75 transmissions, as well as older models requiring GL-3 and GL-4 type gear oils. This fluid meets Ford’s stringent warranty requirements and provides excellent thermal stability, wear protection, and smooth gear shifting. Its high-quality formula ensures optimal performance across a wide temperature range, making it ideal for both modern and legacy Ford manual transmissions.
Importance of Using the Correct Transmission Fluid
Using the correct transmission fluid is crucial for maintaining optimal performance, preventing premature wear, and ensuring warranty compliance. Motorcraft Manual Transmission Fluid is specifically formulated to meet Ford’s specifications, providing superior protection against friction and heat. Using incorrect fluid can lead to transmission damage, reduced fuel efficiency, and costly repairs. Always refer to your vehicle’s owner’s manual or Ford’s guidelines to ensure the right fluid is selected for your vehicle’s specific needs and operating conditions.
Key Features of Motorcraft Manual Transmission Fluid
Motorcraft Manual Transmission Fluid is a fully synthetic, SAE 75W-90 gear oil designed to meet Ford specifications, offering exceptional thermal stability, wear protection, and smooth shifting performance.
SAE Grade and Viscosity
Motorcraft Manual Transmission Fluid features an SAE 75W-90 grade, offering excellent viscosity performance across a wide temperature range. Its 75W rating ensures smooth operation in cold conditions, while the 90 grade provides sufficient thickness for protection in higher temperatures. This dual-viscosity formulation meets Ford specifications, delivering consistent lubrication and wear protection. The fluid’s viscosity index of 211 ensures stability, and its pour point of -65°F enables operation in extreme cold. This balance of properties makes it ideal for manual transmissions, ensuring reliable performance and durability in various driving conditions.
Ford Specifications and Warranty Requirements
Motorcraft Manual Transmission Fluid meets Ford’s stringent WSD-M2C200-C specifications, ensuring compliance with warranty requirements. Designed to protect and maintain Ford transmissions, it adheres to the company’s standards for performance and durability. This fluid is specifically recommended for Ford’s IB5 and MTX-75 transmissions, as well as older rear-wheel-drive models requiring GL-3 and GL-4 gear oils. Its formulation ensures compatibility with Ford’s materials, preventing wear and corrosion while maintaining smooth operation. Using Motorcraft fluid guarantees adherence to Ford’s warranty terms and delivers long-term transmission health. It is the preferred choice for Ford, Lincoln, and Mercury vehicles, ensuring proper build quality and lasting performance. This fluid is essential for maintaining the integrity of Ford transmissions and upholding manufacturer warranties. By meeting Ford’s specifications, it ensures optimal performance and protection for Ford vehicles, making it the trusted choice for drivers seeking reliability and durability.
Applications and Compatibility
Motorcraft Manual Transmission Fluid is compatible with Ford, Lincoln, and Mercury vehicles, including IB5, MTX-75, and rear-wheel-drive transmissions requiring GL-3 and GL-4 specifications.
Recommended Transmissions and Vehicle Models
Motorcraft Full Synthetic Manual Transmission Fluid is designed for Ford, Lincoln, and Mercury vehicles, including the IB5 and MTX-75 transmissions. It is also suitable for rear-wheel-drive transmissions that require GL-3 and GL-4 specifications. This fluid is compatible with older transmissions, ensuring smooth operation and protection. It meets Ford’s warranty requirements and is recommended for vehicles like the Escort, Tracer, and Probe, as well as newer models such as the Escape and Fusion.
Compatibility with Older Transmissions
Motorcraft Full Synthetic Manual Transmission Fluid is compatible with older transmissions, including rear-wheel-drive models requiring GL-3 and GL-4 gear oils. It ensures smooth operation and protection for vintage Ford, Lincoln, and Mercury vehicles, maintaining performance and longevity. This fluid is ideal for transmissions used in older vehicles, providing consistent lubrication and wear protection without compromising compatibility or functionality.
Benefits of Using Motorcraft Full Synthetic Manual Transmission Fluid
Motorcraft Full Synthetic Manual Transmission Fluid offers improved gear shifting, thermal stability, and protection against wear, ensuring enhanced performance and longevity for manual transmissions in Ford vehicles.
Improved Gear Shifting and Performance
Motorcraft Full Synthetic Manual Transmission Fluid enhances gear shifting by reducing friction and wear on synchronizers and gears. Its advanced formula ensures smooth, precise shifts across all driving conditions. The fluid’s thermal stability maintains optimal viscosity, preventing overheating and protecting components during high-stress operations. This results in consistent performance, whether in extreme temperatures or during heavy use, making it ideal for drivers seeking reliable and efficient transmission operation.
Thermal Stability and Protection
Motorcraft Full Synthetic Manual Transmission Fluid offers exceptional thermal stability, protecting transmissions from heat-induced damage. Its high flash point of 366°F (186°C) ensures resistance to degradation under extreme temperatures. This stability prevents viscosity breakdown, maintaining consistent lubrication and safeguarding gears and bearings from wear. The fluid’s advanced additives also shield components from oxidation and corrosion, ensuring long-term durability and reliable performance in both hot and cold operating conditions.
Technical Specifications
Motorcraft Full Synthetic Manual Transmission Fluid features SAE 75W-90 grade, with viscosity of 76.0 cSt at 40°C and 15.4 cSt at 100°C, meeting Ford’s WSD-M2C200-C specification.
Viscosity at Different Temperatures
Motorcraft Full Synthetic Manual Transmission Fluid has a viscosity of 76.0 cSt at 40°C and 15.4 cSt at 100°C, ensuring consistent performance across temperature ranges. Its viscosity index of 211 provides excellent resistance to viscosity change with temperature, maintaining optimal lubrication in both cold and hot conditions. This balanced viscosity profile helps protect gears and bearings, reducing wear and tear while ensuring smooth operation throughout the vehicle’s operating range. The fluid’s pour point of -65°F (-54°C) further enhances its cold-weather performance.
Density and Flash Point
Motorcraft Full Synthetic Manual Transmission Fluid has a density of 0.87 kg/L (7.82 lb/gal) at 15°C (59°F), ensuring proper lubrication and weight distribution. Its flash point of 366°F (186°C) offers high thermal stability, preventing degradation under extreme heat. These properties make it suitable for high-performance and heavy-duty applications, maintaining fluid integrity and reducing the risk of premature wear. The fluid’s consistent density and high flash point contribute to its reliability in various driving conditions, ensuring optimal protection for transmission components.
Installation and Maintenance Guidelines
For optimal performance, always check fluid levels as per the owner’s manual, ensuring correct fill capacities to avoid overfilling and maintain transmission health.
How to Check Fluid Levels
To check the fluid level in your manual transmission, refer to your vehicle’s owner’s manual for specific instructions. Typically, locate the transmission’s inspection hole, clean it, and remove the plug. Use a dipstick or insert a clean tool to measure the fluid level. Ensure the fluid level is within the recommended range, usually 0.00 to 0.20 inches below the lower edge of the inspection hole. Avoid overfilling, as this can damage the transmission. Always use the correct Motorcraft fluid to maintain optimal performance and warranty compliance.
Fill Capacities and Refill Procedures
Fill capacities for manual transmissions vary by model, typically requiring 2 to 4 quarts of Motorcraft Full Synthetic Manual Transmission Fluid. To refill, drain the old fluid completely before adding the new fluid. Fill to the recommended level, usually just below the lower edge of the inspection hole. Avoid overfilling, as it can cause damage. Always use the correct Motorcraft fluid to ensure compatibility and maintain warranty compliance. Consult your vehicle’s owner’s manual for specific fill capacities and procedures.
Comparison with Other Transmission Fluids
Motorcraft Full Synthetic Manual Transmission Fluid outperforms conventional options with superior thermal stability and gear protection, meeting Ford’s strict specifications for optimal performance and longevity.
Synthetic vs. Conventional Fluids
Motorcraft Full Synthetic Manual Transmission Fluid offers superior performance compared to conventional fluids. It provides better low-temperature flow and high-temperature stability, ensuring smoother shifting and extended gear life. Synthetic fluids maintain viscosity better across temperature extremes, reducing wear and tear. Conventional fluids, while cost-effective, may not provide the same level of protection or performance, especially in demanding conditions. Motorcraft’s synthetic formula meets Ford’s strict specifications, making it the preferred choice for optimal transmission health and longevity.
Motorcraft vs. Mercon V
Motorcraft Full Synthetic Manual Transmission Fluid differs from Mercon V, as it is specifically designed for manual transmissions, offering superior gear protection and smoother shifting. Mercon V is typically used for automatic transmissions and power steering systems, with different viscosity and additive packages. Motorcraft Manual Transmission Fluid meets Ford’s WSD-M2C200-C specification, ensuring compatibility with Ford manual transmissions, while Mercon V serves different applications, making Motorcraft the preferred choice for manual transmission needs.
Safety and Handling Tips
Ensure proper storage in a cool, dry place, away from heat sources. Dispose of used fluid responsibly through recycling centers. Avoid contamination during handling.
Proper Storage and Disposal
Motorcraft Manual Transmission Fluid should be stored in a cool, dry place away from heat sources and open flames. Keep the container tightly sealed and upright to prevent leakage. Dispose of used fluid responsibly by taking it to a recycling center or an authorized service provider. Never drain the fluid into sewers, waterways, or the ground, as it can harm the environment. Always follow local regulations for hazardous waste disposal to ensure eco-friendly practices and prevent contamination.
Precautions to Avoid Contamination
To prevent contamination of Motorcraft Manual Transmission Fluid, always use clean tools and equipment when handling the fluid. Ensure the area is free from dirt and moisture before opening the container. Avoid mixing the fluid with other lubricants or substances, as this can degrade its performance. Use a clean, dry filter when transferring the fluid, and store it in its original container with the cap securely tightened. Clean any surfaces thoroughly before refilling to prevent dirt or debris from entering the transmission system.
Warranty and Certification
Motorcraft Manual Transmission Fluid meets Ford Motor Company’s rigorous standards, ensuring compliance with factory warranties and industry certifications for reliable performance and durability.
Ford Motor Company Approval
Motorcraft Full Synthetic Manual Transmission Fluid is officially approved by Ford Motor Company, meeting strict specifications like WSD-M2C200-C. It ensures compliance with factory standards, maintaining warranty coverage and delivering reliable performance. Designed for Ford, Lincoln, and Mercury vehicles, it meets API GL-4 service requirements. This fluid is recommended for transmissions such as IB5 and MTX-75, ensuring compatibility with both newer and older models. Its SAE 75W-90 grade guarantees optimal performance across temperature ranges, preventing wear and tear on critical components.
Industry Standards and Certifications
Motorcraft Full Synthetic Manual Transmission Fluid adheres to rigorous industry standards, including API GL-4 certification, ensuring superior wear protection and thermal stability. It meets Ford’s WSD-M2C200-C specifications and is designed to comply with ACEA standards, making it a trusted choice for manual transmissions. The fluid’s viscosity index of 211 ensures consistent performance across varying temperatures, while its high flash point of 366°F (186°C) provides excellent thermal protection, meeting the demands of both modern and older transmissions. This ensures reliability and longevity for your vehicle’s drivetrain.
Frequently Asked Questions
Motorcraft Manual Transmission Fluid is a premium synthetic gear oil recommended for Ford vehicles, ensuring optimal performance and protection. Always consult your owner’s manual or Ford’s guidelines for specific usage and recommendations.
Common Questions About Motorcraft Manual Transmission Fluid
Motorcraft Manual Transmission Fluid is a premium synthetic gear oil designed for Ford vehicles. It meets Ford specifications and is recommended for use in manual transmissions requiring GL-4 performance. Users often inquire about its compatibility with older models and its advantages over conventional fluids. Additionally, questions arise about proper application and maintenance procedures to ensure optimal performance and transmission longevity. Always refer to the owner’s manual for specific recommendations.
Motorcraft Manual Transmission Fluid is a top choice for Ford manual transmissions, offering superior protection and performance, making it a trusted option for enthusiasts and professionals alike.
Final Thoughts on Motorcraft Manual Transmission Fluid
Motorcraft Full Synthetic Manual Transmission Fluid stands out as a top choice for Ford manual transmissions, offering superior performance and protection. Its SAE 75W-90 grade ensures excellent thermal stability and gear protection across various temperatures; Designed specifically for Ford vehicles, it meets stringent warranty requirements and is compatible with both newer and older transmissions. Whether for daily driving or high-performance needs, this fluid delivers smooth gear shifts and long-lasting lubrication, making it a trusted option for enthusiasts and professionals alike.